I-XJCM fast traction tower crane iyathengiswa
I-XJCM imodeli entsha ye-QTKZ-20 inezici ezilandelayo:.
1.Ukusebenza okukude okungenantambo, u-opharetha oyedwa angaqedela umsebenzi wokuphakamisa.
2, Ukwamukela i-torque hydraulic control system, isikhombikubona esilula nokuphendula okubucayi.
I-3, I-outrigger isebenzisa isilawuli sokulinganisa i-hydraulic, ukuvikelwa okuphindwe kabili kokuphepha kokukhiya kwe-hydraulic kanye nokukhiya ngomshini.
I-4, Isakhiwo sonke sihlangene, samukela umhlangano we-axle ekabili kanye nokunyakaza okulula nokuqondisa.
5, I-angle yokuqondisa enkulu ingafinyelela +20/-20°, engafinyelela endaweni encane kakhulu.
6. Ukumiswa okusheshayo, ukusebenza kahle kokulungiswa, umsebenzi ozinzile nokusebenza kahle okuphezulu.
7, Ijubane lokudonsa kwe-flywheel lingafinyelela ku-80km/h, futhi lingathuthwa kalula lisuka endaweni eyodwa liye kwenye kungakhathaliseki ukuthi likude kangakanani.I-tow bar inejubane lokudonsa elingu-25km/h, elilungele ukushintshwa kwebanga elifushane.
8, Umzimba wombhoshongo womkhiqizo kanye ne-boom zenziwe ngepuleti lensimbi elinamandla amakhulu, elizinzile futhi elithembekile.
Amapharamitha
| Isigaba | Izinto | Amayunithi | I-QTKZ-20 | ||||
| Amapharamitha wokuphakamisa | Ukuphakama okuphezulu | m | 24 | ||||
| Irediyasi ephezulu yokusebenza | m | 26 | |||||
| Isisindo esiphezulu | Kg | 2000 | |||||
| Isivinini sokuphakamisa | m/min | 13/26 | |||||
| Isivinini sokudonsa | m/min | 20/40 | |||||
| Isivinini sokugoba | r/min | 0.25/0.8 | |||||
| Isikhathi sokumisa | imiz | 10 | |||||
| I-Outrigger span | m | 4.2X4.2 | |||||
| Imingcele yokuhamba | Isivinini esikhulu sokudonsa | m | 80/25 | ||||
| Ubukhulu bebonke(ubude*ububanzi*ubude) | m | 14.1×2.5×4.15 | |||||
| Uhlelo lweHydraulic | Uhlelo lweHydraulic | I-MPa | 28 | ||||
|
| Ukunikezwa kwamandla kagesi | 380V/50Hz | |||||
| Ukuphakamisa ithebula lokusebenza | Irediyasi(m) | 10 | 12 | 15 | 20 | 26 | |
| Isisindo sokuphakamisa (Kg) | 2000 | 1600 | 1300 | 1000 | 800 | ||
